TRANSFORMS YOUR SINGLE-HANDED STABILIZER
The Flycam Comfort Arm & Vest converts a handheld stabilizer into a full body-worn system that eliminates the stress and captures fluid on-screen camera shots with unsurpassed comfort.
The spring arm and vest connects to each other assisting the stabilizer and greatly improving the overall functionality and reducing operator fatigue.
It lets you execute more natural-looking manual camera pan movements.
Gives you Wide Vertical range of motion, including “Low Mode”.
EXPERIENCE RELIEF WITH THE COMFORT VEST
Foam Padded Vest with extremely breathable material provides great comfort, perfect fit and unrestricted movements.
Easy height adjustment & Velcro straps enable a comfortable fit for all body types.
A unique and proprietary Arm-to-Vest Connector allows the Support Arm’s angle to be adjusted relative to the Support Vest.
Push-fit buckles allow you to remove the vest quickly during short breaks.
NATURALLY SMOOTH SHOTS WITH THE COMFORT ARM
The lightweight, dynamic Comfort Arm is designed to carry payloads up to 5kg/11lb and optimize performance throughout its lifting range.
The arm absorbs all jerks, bumps and shakes on even the roughest terrains while you walk or even run.
Spring Tension Adjustment Knob easily adjusts the tension of the spring depending upon the weight of the setup.
The Stainless-Steel Spring and high-quality bearings in the arm provide for an Ultra Smooth shot while you follow the subject.
Arm: High-grade CNC Machined Aluminum
Vest: CNC Aluminum & Synthetic Fabric
up to 5kg / 11lb
28" to 60"
Length of Spring
Arm Vest Connector Pin Diameter
Stabilizer Arm: 1.39 kg / 3.5 lb
Stabilizer Vest: 1.67 kg / 3.6 lb
IN THE BOX
Flycam Comfort Arm
Flycam Comfort Vest
Guaranteed Fast Delivery
Quick and Efficient
great for the price!
You will definitely be pleased with this vest for the price. Now I�m trying to figure out a way to mount the camera to it and use it with a handheld grip. Any suggestions?
Came on time !!
Open the box and love that everything was what they said it would be and prompted service thank you again !
Good article but you have to practice.
Q&AAsk a Question
What are the size of the buckles?
The buckles of the Flycam Comfort Arm & Vest are 2" Plastic clip buckles.
Is this compatible with the dji rsc2?
The Flycam Comfort Arm & Vest is not compatible with the DJI RSC2. However, you can mount this on the Flycam, Galaxy Arm & Vest GLXY-AV with the help of Flycam Gimbal Adapter FLCM-GA.
Can i put a dslr on it? is it possible to mount one on there? saw a video and they were using larger cameras but curious on the usage of a dslr ?
Yes, you can put a DSLR on it, you can put a variety of cameras as this arm and vest will perfectly work for total weight up to 8kg(17lbs).
Just to make sure. this comes with the vest & the fly cam stabilizer?
Yes, It comes with an Arm and Vest only. The Flycam stabilizer is 'NOT INCLUDED' in this kit.
Does the vest have a carrying case too?
No, The vest doesn't come in a carry case.
What is the warranty?
We provide 1 year warranty from the date of purchase. Items which are covered by the warranty period will be replaced at no cost to the customer. Replacement parts of the product will be provided at nominal cost (covering the cost price of the replacement parts only) to the customers after the Warranty Period has expired.
What are the minimum and maximum chest and waist sizes the vest will fit ?
The Vest will fit to the sizes as follows :
Minimum Chest Size : 38 inches
Minimum Waist Size : 28 inches
Maximum Chest Size : 52 inches
Maximum Waist Size : 60 inches
Do the vest and arm help with stabilization?
Yes it does help, however the most important part of stabilization is first balancing the flycam initially. That would mean placing all items that will be used on the day of shooting (ie, Monitor, Battery, Camera, Lens, Wires, additional mounts, etc) for proper accuracy in the balancing process. It will take some time to correctly balance, but once you have the corret balance of the stabilizer, the arm and vest will be extremely helpful in the final stabilization.
Will this work with a glidecam 4000 and hd series?
Yes, it will perfectly work with your glidecam stabilizer. But this kit does come with it's own stabilizer.
What is the shipping weight of this kit? it does not include table clamp? thanks!
The shipping weight is around 11lbs or 5kg. It does not come with a table clamp.
What is the diameter of the main shaft?
The main shaft (spool adapter) has the diameter of 18.5mm which can easily adapt the stabilizers with the handle's inner diameter of 19mm. We provide a bush to add onto it to make it 21.5mm so that it can adapt to the handle's diameter of 22mm.
Is it returnable for a full refund if it doesn't meet my expectations upon delivery?
Yes, absolutely. We always backup our sales. In case, you don't like the product, we take it back within 30 days and you get a 100% refund.